EY 503B Cordless Drill
& Driver
1. 1-hour charging
system
2. Easily converts
from straight to pistol form
3. Multi-stage
clutch plus drill position
4. 2-speed gear box
5. 1/4” hex
drive
6. Gear lock
mechanism for manual tightening
7. Reversible
a:lin
k { |
 |
•
Trade Groups
• Rack/cabinet
installers
• Electricians
• Industrial
manufacturing
• Work
inspectors
• Service
engineers
• Electronic/Electrical
manufacturing |
|
| EY503B has a dominant
position among small drivers for
professional use. It is not a replacement
for our other drill/drivers when heavy
drilling/driving is required, but it is
more comfortable for light installation
work. Within electric installations,
typical usage involves installing light
switches, jacks, various equipment and
connections in electric fuse boxes and
automatic equipment. In the low range, EY503B
has a maximum torque of 30 kg-cm. If more
power is needed or to save on the
battery, simply release the power switch
in which case the machine is
automatically locked. You can now use the
unit as a manual screwdriver. The torque
selection allows you to select a desired
torque between 4 and 20 kg-cm, which is
important when setting screws in fragile
material. In position 6, the machine
offers full power. In professional use,
EY503B has economical and ergonomic
advantages. Driving screws is a lot
faster than using manual screwdrivers,
whilst operator fatigue is reduced to a
minimum. |
| Technical
Data Charging
Time: 1 hour
Battery Pack:
2.4V Battery pack (EY903)
Battery Charger:
2.4V 1 hour charger (EY 503B7660)
Speed at No Load:
High/400 rpm Low/200 rpm
Max. Torque:
0 kg-cm
Clutch Torque: 4-20
kg-cm multi stage
Chuck: 1/4”
hex drive
Manual
Tightening: Yes
Weight (incl.
battery): 0.4 kg
Overall Length:
Max. 230 mm
Working Capacity:
Wood Screws into Yellow Pine (diam. 3.5x20
mm): approx. 100
Holes in Metal
sheet: (1 mm thickness, ~2 mm): approx.
50
Standard
Accessories: Battery pack (EY903), 1
hour charger (EY503B7660)
|
|
