Electronics & Computers Main Menu  ••••  Electronics & Computers Product Info
EY 6225 Cordless Drill & Driver 
1. 15 minute charging system 
2. Easily converts from straight to pistol form 
3. Auto Shut-off Clutch extends Battery and Clutch life by immediately stopping rotation once torque setting is reached 
4. New 21 stage clutch offers you more precise torque setting 
5. 1/4” hex drive 
6. Max 600 rpm. for high speed screw driving 
7. Reversible 
a:lin k { 
[EY6225 Cordless Drill Driver]
Trade Groups  -
• Rack/cabinet installers 
• Electricians 
• Industrial manufacturing 
• Work inspectors 
• Service engineers 
• Electronic/Electrical manufacturing 
 
EY6225 has a dominant position among small drivers for professional use. It is not a replacement for our other drill/drivers when heavy drilling/driving is required, but it is more comfortable for light installation work. Within electric installations, typical usage involves installing light switches, jacks, various equipment and connections in electric fuse boxes and automatic equipment. In the low range, EY6225 has a maximum torque of 45 kg-cm. If more power is needed or to save on the battery, simply release the power switch in which case the machine is automatically locked. You can now use the unit as a manual screwdriver. The torque selection allows you to select a desired torque between 4 and 45 kg-cm, which is important when setting screws in fragile material. In position 6, the machine offers full power. In professional use, EY6225 has economical and ergonomic advantages. Driving screws is a lot faster than using manual screwdrivers, whilst operator fatigue is reduced to a minimum.
Technical Data

Charging Time: 15 minutes 
Battery Pack: 3.6V Battery pack (EY9025) 
Battery Charger: 3.6V 15 minute charger (EY 0225B) 
Speed at No Load: High/600 rpm Low/200 rpm 
Max. Torque: High/15kgf-cm Low/45kgf-cm 
Clutch Torque: 0.3 - 3.0 Nm 
Chuck: 1/4” hex drive 
Manual Tightening: Yes 
Weight (incl. battery): 0.520 kg 
Overall Length: Max. 296 mm 
Working Capacity: Wood Screws into Yellow Pine (diam. 3.5x20 mm): approx. 100
Holes in Metal sheet: (1 mm thickness, ~2 mm): approx. 50 
Standard Accessories: Battery pack (EY9025), 15minute charger (EY0225B)