| Specifications: |
| Model Number |
RD07 |
| Motor Type |
Stihl 2 stroke |
| Displacement (cm) |
34.4 |
| Overload clutch |
Yes |
| Cutter speed (rpm)
in "no load" working
condition |
200 |
| Overall
Dimensions |
Length 500 mm
Width 420 mm
Height 450 mm |
| Net Weight |
18.5 kg |
| Throttle
Activation |
Manual lever on feed
hand |
| Through Spindle
Coolant |
Yes |
| Vibration m/sē
A(8) based on drilling 24 holes
each of one minute duration |
2.47 |
| Noise level at
operator's ear. Acoustic pressure
db (A) |
89 |
|
PETROL DRIVEN
RAIL DRILLING MACHINE
RD07
• 2 stroke
Stihl engine
• Worldwide
Stihl service approval
• Lightweight
• Highly
portable - ideal for use in remote
locations
• Robust and
reliable
• SPECIAL
multi form templates designed for
specific rail profiles and hole centre
requirements
• Clutch
control
• Through
spindle coolant
• Manual lever
throttle activation
• Can be used
at an inclined angle
|
Templates
- Can be used on a minimum of two
different rail sections. 
Rail Cutters
- The two types of annular cutter
for specific use on rails are: RCV
M42 High-Wear Cutter: 13mm - 52mm
diameter x 25mm and 50mm in
length. CRWC Tungsten
Carbide Tipped Cutter: 18mm - 36mm
diameter x 25mm in length.
Pressurised
Cutting Fuid Dispenser - Each
rail drilling machine is supplied
with a Cutting Fluid Dispenser,
Cutter Pilots and Cutting Fluid.
The performance, speed and life
of the Cutter will be
significantly improved by its
sustained use through the cutting
cycle.
Carrying/Storage
Case - A robust, lightweight
case is available for carrying
and storage of the machine.